Buggy 8IGHT 1/8 4WD Nitro RTR Losi
- 499.00€
- Disponibilidade: Em Stock
- Fabricante: LOSI
- Código do produto: LOS04010
Inclui:
Carro a combustão 8IGHT 4WD Nitro Buggy Ready To Run Losi
Comando DX2E Spektrum
4 Pilhas AA para o Comando
Pack de Receptor 6.0V 1600mAh 6V NiMH Dynamite
4-Way Cross Wrench
Bind Plug
Manual de instruções
Características:
Se está a pensar tornar-se um piloto RC então este é o carro certo para começar! O Losi® 8IGHT Nitro Buggy RTR, vem completamente montado e equipado com a força bruta de um motor nitro .21 Dynamite® e a resposta precisa que apenas um sistema de rádio Spektrum ™ DSMR® pode fornecer. Com este carro beneficia da mesma geometria de suspensão, que os pilotos da Team Losi utilizam nos buggies 8IGHT.
Carro buggy 1/8 a combustão preparado para lazer o iniciantes na competição;
Chassi em alumínio T-6 endurecido de 4mm
Placa de rádio de 3ª Geração que permite extensão da vida dos servos;
Motor Dynamite® .21 nitro com puxa-corda;
Geometria de suspensão pré-definida;
Transmissões e diferenciais em metal;
Amortecedores de 15mm Big Bore com afinação ajustável;
Servos Spektrum™ waterproof com carretos metálicos
Comando Spektrum DX2E DSMR®
Especificações
Type:Nitro Buggy
Scale:1/8
Length:19.6 in (497mm)
Width:12.1 in (308mm)
Height:7.1 in (180mm)
Ground Clearance:2.4 in (60mm)
Wheelbase:12.7 -12.9 in (323-327mm)
Weight:7.8 lb (3.5kg)
Chassis:4mm, 6061 T-6 Aluminum
Suspension:Independent
Drivetrain:4WD
Motor or Engine:.21 Dynamite
Radio:Spektrum DX2E 2-Channel
Servos:Included
Batteries:Dynamite NiMH Battery 6V 1600mAh Reciever Pack 3+2 Hump
Gear Pitch:1.0Mod
Kit/RTR:RTR
Shock Type:16mm Big Bore Aluminum Oil Filled
Body:8IGHT Cab -Forward, Screened
Ball Bearings:Yes
Fuel Tank Capacity:125cc (4.2 Oz)
Experience Level:Intermediate
Recommended Environment:Outdoor
Is Assembly Required:No
Completion Guides
Informação adicional da marca:
Overview
If you are serious about becoming a competitive nitro buggy racer, this is the place to start. The Losi® 8IGHT Nitro Buggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .21 nitro engine and the precise response that only a Spektrum™ DSMR® radio system can provide. You also get the benefit of a pre-set suspension that shares the same geometry team drivers use on their 8IGHT buggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle's performance with many of the 8IGHT option parts currently available.
Race-Proven Durability
In addition to its 4mm T-6 aluminum chassis plate, the 8IGHT Nitro buggy uses a Gen III radio tray that prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It has been designed to resist wear and tear from chassis flex, too.
Brute Power
A powerful Dynamite .21 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don't have to buy a starter box to get racing right away.
Metal-Gear Drivetrain and Sealed Differentials
A metal-gear transmission and sealed differentials give the buggy all the durability it needs for long mains and rough conditions.
Center and Rear Dogbones
These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.
Pre-Set Suspension Geometry
The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.
| Approximate Assembly Time: | No assembly required |
| Ball Bearings: | Yes |
| Batteries: | Dynamite NiMH Battery 6V 1600mAh Reciever Pack 3+2 Hump |
| Body: | 8IGHT Cab -Forward, Screened |
| Brakes: | Composite Disc with Steal Pads |
| Bushing Material: | Metal |
| Chassis: | 4mm, 6061 T-6 Aluminum |
| Completion Level: | Ready-To-Run |
| Differential: | Sealed viscous filled gear differential |
| Drivetrain: | 4WD |
| Engine Size: | .21 Dynamite,.21 cu in (3.4cc) |
| Final Drive Ratio: | 11.5:1 |
| Front Track: | 12.0 in (305mm) |
| Fuel Tank Capacity: | 125cc (4.2 Oz) |
| Gear Pitch: | 1.0 Module |
| Ground Clearance: | 2.4 in (60mm) |
| Height: | 7.1 in (180mm) |
| Internal Gear Ratio: | 3.92:1 |
| Length: | 19.6 in (497mm) |
| Outer Diameter: | 4.4 in (111mm) |
| Pinion: | 17T |
| Radio: | Included |
| Rear Track: | 12.1 in (307mm) |
| Scale: | 1/8 |
| Servos: | Included |
| Shock Type: | 16mm Big Bore Aluminum Oil Filled |
| Spur Gear: | 50T |
| Suspension: | Independent |
| Tire Compound: | Medium |
| Tire Tread: | XBT |
| Track: | 12.1 in (307mm) |
| Vehicle Type: | Buggy |
| Weight: | 7.8 lb (3.5kg) |
| Wheel Diameter: | 3.3 in (83.5mm) |
| Wheel Type: | Dish |
| Wheel Width: | 1.7 in (42mm) |
| Wheelbase: | 12.7 -12.9 in (323-327mm) |
| Width: | 12.1 in (308mm) |
Nota: Este artigo é contra-indicado para crianças com menos de 3 anos.
